4 Steps tell you how to use Chinese pipe bending machine correctly

4 Steps tell you how to use Chinese pipe bending machine correctly

How to use China pipe bending machine in the correct way

  • Refer to the instructions for the use of the electric oil pump.
  • First, the working oil cylinder is screwed into the internal thread of the square block, so that the rear wheels of the oil cylinder are mounted downward on the support wheels.
  • To select the die head according to the outer diameter of the pipe, put the corresponding slot at the corresponding slot on the plunger to the die head, then put it in the corresponding size flower plate hole, then put the upper flower plate cover, insert the elbow into the slot, and then move the fast joint part of the high pressure tubing end to the moving part.
  • After pulling on the joint of the working oil cylinder, the oil drain screw on the electric oil pump is screwed tightly, and the pipe can be bent. After the elbow is finished, release the oil drain screw, and the plunger automatically reset.
Read More  
1 min read
Just do these 10 points before operating pipe bending machine

Just do these 10 points before operating pipe bending machine

What need to do before we start operating pipe bending machine

Do it carefully before operation of china pipe bending machine
1. The machine tool must be well grounded, and the wire must not be less than 4 mm 2 copper soft wire. It is not allowed to access the power supply voltage beyond the specified range, and can not plug and plug plug-ins. It can not test the control loop with mega ohmmeter, otherwise it may damage the device.
2, when inserting the connector, it is not possible to draw wires or cables to prevent welding.
3. Proximity switches, encoders, etc. can not be hit by hard objects.
4, can not use sharp object collision display unit.
5, the electrical box must be placed in the ventilation area, and it is forbidden to work in dust and corrosive gases.
6, do not install or change PC input and output.
7, when the machine power is switched, the motor must be reconfirmed.
8. Machine tools should be kept clean. Special attention should be paid to the fact that there should be no foreign objects in sliding grooves such as clamping blocks and sliders.
9, regularly add lubricant to the chain and other sliding parts.
10. It is necessary to disconnect the power supply when cleaning and repairing.

Read More  
1 min read
How to choose the pipe bending machine to use correctly?

How to choose the pipe bending machine to use correctly?

The tube bending machine adopts touch screen and numerical control module, and the dialogue operation is easy.

The tube bending machine adopts touch screen and numerical control module, and the dialogue operation is easy. The program is easy to set, the bed structure is stable, and it is not easy to deform. Each file can be set with 16 elbow angles, and the memory can store 16 files. Slow positioning function, stable elbow angle and repeat ability accuracy of + 0.1 degrees. Error message is displayed on the screen to help operators immediately remove. Provide self developed coordinate conversion bending pipe processing value, software can be purchased and installed on desktop computer editing calculation.
 The upper tool holder of the hydraulic pipe bending machine wobble around a fixed axis during the shearing process. Through the lever action, the support point is small, the life of the cutting edge and the machine life can be improved, the whole machine structure is compact, and the stroke of the knife frame can be adjusted without the pole, and the working efficiency is greatly improved.
First of all, what type of hydraulic pump to use the hydraulic pump is related to the oil cylinder, this depends on how large cylinder you use, the general use of CN10 (10 displacement gear pump) is almost the same. If it's better, use YCY series plunger pump (independent variable) to save electricity and strength.

Read More  
1 min read
6 Points of Chinese single head pipe bending machine explaination

6 Points of Chinese single head pipe bending machine explaination

China pipe bending machine can be roughly divided into CNC full automatoc pipe bending machine, hydraulic pipe bending and so on.

China pipe bending machine can be roughly divided into CNC full automatic pipe bending machine, hydraulic pipe bending machine and so on. It is widely used in the railway construction, wheel barrow, furniture, with many advantages, reasonable structure, simple operation and so on. In addition to the elbow function. Compared with the CNC automatic pipe bending machine, it has the advantages of cheap price and convenient use. It occupies the leading position in the domestic pipe bending machine market.
Characteristic
1. China tube bending machine use PLC touch screen, conversational operation, and program setting is simple and easy.
2. The structure of the bed is stable, and it is not easy to deform.
3, Each file can set 16 elbow angles, and the memory can store 16 groups of files.
4, Slow positioning function, stable elbow angle, accuracy of + 0.1 degrees.
5. The error message is displayed on the screen to help the operator remove it immediately.
6, provide self developed coordinate conversion elbow processing value, software can be purchased and installed on desktop computer editing calculation.

Read More  
1 min read
The Smart Trick of tube bending machine That No One is Discussing

The Smart Trick of tube bending machine That No One is Discussing

We provide a very significant inventory of tooling with in excess of 600 bending dies. This permits our prospects to save on tooling expenditures.

We provide a very significant inventory of tooling with in excess of 600 bending dies. This permits our prospects to save on tooling expenditures. As well as our currently furnished stock, we even have a Device and die style and design Section, all set to satisfy any of your respective custom die wants. The Instrument and die Section can Establish your die in a value successful manner with shortened lead instances.

Since the pipe is just not supported internally There is certainly some deformation of the shape from the pipe, resulting in an oval cross portion. This method is utilised the place a steady cross segment of the pipe is not really essential. Whilst a single die can develop several styles, it only is effective for 1 size tube and radius.

Stress amount that could fracture a fabric. This will commonly cause the structure failing as a security unit.

hydraulic bending machine / for tubes / CNC / horizontal Digibend 200e Come up with a ask for hydraulic bending machine

Prices are pre-tax, exclude delivery rates and customs obligations, and don't contain further costs for installation or activation solutions. Selling prices are indicative only and should fluctuate by nation, with changes in Uncooked supplies charges or exchange prices.

hydraulic bending machine / for tubes / profile / bar T22 Chamaleon Produce a request hydraulic bending machine

The Etisalat Yellowpages business enterprise directory is an online Market that helps you record and also discover; exporters, importers, company companies etcetera. This UAE enterprise Listing is an individual place to get a number of benefits, one among which includes, cost-free online advertising in UAE.

I've had no trouble with managing the radius or locations of your bends. I suppose any kind of Wooden that bends customarily ought to bend with this technique. Birch, Ash, Oak, Beech, Elm, and Cherry need to all be great I believe (given that They are really air dried rather than kiln dried).

Having said that, for the duration of a plant outage or shutdown, china pipe bending machine manufacturers the tiny (little bore) pipe may additionally be pre-fabricated to expedite installation over the outage. After the pipe is put in It'll be analyzed for leaks. Just before tests it might should be cleaned by blowing air or steam or flushing by using a liquid.

For that production of dished ends and vessels HAEUSLER presents HKP dishing presses and flanging machines HBM in all sizes.

The construction of large strain storage vessels (Notice that giant force vessels are produced from plate, not pipe owing for their wall thickness and sizing).

The CRWM welding machine is created to simplify the subsequent inner and exterior welding seams on longitudinal welded pipes.

all-electrical bending machine / metal tube / CNC eMOB one hundred fifty CNC Make a ask for all-electric bending machine

The illustrations and standpoint in this article deal mostly with The usa and don't stand for a worldwide see of the subject.

Read More  
1 min read
6 Things The Boss Wishes You Knew About  China Pipe Bending Machine Manufacturers

6 Things The Boss Wishes You Knew About China Pipe Bending Machine Manufacturers

As one of china pipe bending machine manufacturers, we must get lots of news of pipe bending machine

1. what is the current situation of the supplier of the pipe bending machine in China?
2. how many pipe bending machine manufacturers are there in China?
3. what advantages do we have as a supplier of pipe bending machine?
4. what can we do to improve the sales of pipe bending macine?
5. on the market, how many kinds of pipe bending machines for sale are there?
6. what is the position of our products in the market?

Read More  
1 min read
What not to do in the china pipe bending machine industry

What not to do in the china pipe bending machine industry

Don't do that if you are China pipe bending machine manufacturer

Pipe bender is widely used, and many entrepreneurs have chosen the industry of china pipe bending machine.

This also leads to a vicious competition in the pipe bending machine industry

We can not defame the word of mouth of the manufacturers of China pipe bending machine.

Read More  
1 min read