The metal processing plant of China single head hydraulic cnc automatic pipe bending machine is currently facing some complicated problems.


1 min read

Metal process plants that use China single head hydraulic cnc automatic pipe bending machine presently face some advanced issues, and also the high price of raw materials makes every bit of blank a requirement. the short response and also the disposition to vary the operation mode of the bending forming section to fulfill this desires of the sheet process plant will cut back the preparation time.
This leads to larger production capability and reduced scrap rates. Developing and implementing well-designed SOPs, creating higher use of storage and inventory systems, leverage machine practicality and leverage human resources ar ways that to assist bend molding retailers increase potency and productivity. The CNC pipe bending machine is principally composed of 3 halfs: mechanical part, mechanism and PLC system. The mechanical half in the main consists of a pipe clamping device, a bending pipe transmission device, a boosting device, a bed body and a bending pipe mould. The rule of the elbow is as shown within the figure: the elbow mould is mounted on the most shaft and rotates with the most shaft. The tube is mounted on the clamping groove of the fan-shaped elbow mould by the clamping mould, and also the movable auxiliary guiding material is controlled by the slippy groove. hooked up to the skin of the bend of the tube blank, once the bend mould is turned by Associate in Nursing angle.
The tube is wound round the circumference of the bending die, and also the angle of rotation of the bending die is that the bending angle. The 3-dimensional multi-bend of an equivalent radius completed on one pipe member in the main has three major actions: linear feeding, area rotating pipe and bending pipe.

Comments
* The email will not be published on the website.