Before operation, first check whether the smooth points of the pipe bender are short of oil, whether the movement mechanism can be loosened, and whether the safety protection installation can be securely installed. It is to be confirmed that the front can be operated. Start the elbow oil pump, whether the system pressure can be maintained within the specified range, if it is high, it will damage the hydraulic components and waste the power supply, if it is too low, it will affect the work. Adjust the required position and angle of the parts. Adjust the positioning of the machine to the required length. Adjust the vertical lifting rail so that the guide mold pressing cylinder can clamp the iron pipe tightly. The clamping cylinder can clamp the iron pipe.
The normal operation is to put the workpiece into the bending mold, and the front end is contacted and positioned, and the foot switch is stepped on to complete. When operating the pipe bender, you must concentrate your mind and stop putting your hands or other objects in the work area. In case of emergency, press the emergency stop button, and then turn the rotary switch to the manual position and reset it manually. If something goes wrong, promptly Repair. After the work is finished, cut off the power supply and do a good job of cleaning and smoothing. The CNC pipe bender is mainly used for electric power construction, highway and railway construction, boiler, bridge, ship, furniture, decoration and other aspects of pipe laying and repair. It has the advantages of multiple functions, reasonable structure, simple operation, convenient movement, and fast installation.
In addition to the pipe bending function, this machine can also use the oil cylinder as a hydraulic jack. Relative to the CNC pipe bending equipment, it is inexpensive and easy to use, occupying the leading product position in the domestic pipe bending machine market. Numerical control pipe bending machine, can stop one bending radius (single-mode) or two bending radii (dual-mode) winding bending of pipes in cold state. It is widely used in the bending of various pipe fittings and wires in automobile, air-conditioning and other industries. . The pipe bending machine is mainly used for plastic forming of pipes.
