1 min read
Operating the pipe bending machine is actually a simple job

The actual operation of the pipe bending machine is very convenient. It only needs to train the operator slightly for a period of time. During this period, the semi-automatic pipe bending machine is simpler, and the CNC pipe bending machine is still in demand because of the many parameters that can be set. Have a certain foundation.

The pipe bending machine uses the popular language to explain the equipment used to bend the pipe. It can be seen in our daily life as seats, fitness equipment, fences, etc. As long as the straight pipe needs bending, it is required to use the elbow. machine.

Nowadays, the common bending machines in the factory include manual tube bending machine, semi-automatic hydraulic tube bending machine and CNC tube bending machine (automatic tube bending machine). During this period, the manual tube bending machine has been gradually replaced by speed and efficiency. Replaced by semi-automatic pipe bending machine and CNC pipe bending machine.

The operation principle of the pipe bending machine: the pipe bending machine comprises a bracket, a working table and a clamping plate, the working table is placed on the bracket, the working table is composed of a base and a pressing plate, and the base is connected with the clamping plate through a hinge, and the base is composed of a seat shell and a coil It is composed of a cover plate, and the coil is placed in the depression of the seat shell, and the top of the depression is covered with a cover plate. When in use, the coil is energized by the wire, and after the power is applied, gravity is applied to the pressure plate, thereby completing the clamping of the thin plate between the pressure plate and the base. Because of the electromagnetic force clamping, the pressure plate can be made into a variety of workpiece requirements, and the workpiece with the side wall can be processed, and the operation is also very simple.

* The email will not be published on the website.