For the operation of the pipe bending machine, every worker must carefully study. If we want to improve the service life of our equipment, we must learn the operating methods of this equipment in a scientific way. Learning scientific operation and simple maintenance knowledge is very effective for improving the service life of the equipment. Of course, on the contrary, if the operation is abnormal, it will only cause accidents, and even bring greater life threats to the operators.
There is a safety guard design next to the arm bend of the pipe bender. The advantage of this design is that if our operators enter the arm bend, the arm bend will stop, and the screen will display flashing prompts, which are all alerts. Because if the human body comes into contact with the range of the arm bend, it is easy to cause personnel pinching injury.
"If you find that the pipe bending machine has been operating abnormally, it is recommended that the staff immediately cut off the power supply, which can stop all hazards. We can restart the machine, but we must ensure that everything operates within a reasonable range.". First of all, we need to press the emergency shutdown button, which is located on the operation panel and can be seen in a very prominent position.
Just press this power supply and the machine can stop running. In addition, operators should avoid overload operation, as excessive load causes high pressure on the equipment. If pipe bending occurs, excessive torque can easily cause overload. The natural life of equipment under long-term overload will not be too long. Generally speaking, the acceptable tensile coefficient for iron pipes is within 40 kilograms, and should not exceed this range.