Experts tell you how to get the strength of China pipe bending machine?


1 min read

The definition of mechanism and machine comes from mechanical engineering, which belongs to the most basic concept in modern mechanical principle. The modern concept of Chinese machinery is mostly derived from the word "mechanical" in Japanese. The mechanical engineering of Japan defines the mechanical concept as follows: A machine is a combination of objects, and it is difficult to deform assuming that a force is applied to each part thereof. These objects must achieve mutual, single, defined movements. Transform the applied energy into the most useful form, or transform it into effective mechanical work. So where does the force come from and where did it go? What is going on with this process? Today, our Taiwanese and mechanical staff will give you a brief introduction on how to get the strength?

There are two main ways to measure the radius of a pipe bending machine:

1, a more scientific and accurate method: the use of the Pythagorean theorem, in fact, using the Pythagorean theorem can be accurately calculated. The process is also very simple. First measure the distance between the ends of the elbow, then assume a right-angled triangle, and finally apply the Pythagorean formula, so that it is easy to scientifically calculate the precise bend radius.

2, a more reliable and practical but not very precise method: first use the paper shell rounding and the radius of the curved tube to compare, repeatedly modify the size of the paper shell circle until the radius of the curved tube. The diameter of the paper shell circle is then measured by a measuring ruler and converted into the radius of the curved tube. Generally, the torque is obtained by the shifting mechanism, so that the ordinary motor can be competent unless the special pipe is now simple and cost-effective.

The torque and speed thus come out can be seen from the actual situation. The servo drive is mounted in an electrical control box, and a servo drive controls the AC servo motor on each rotatable machine shaft. For example, the feed axis, the corner axis, each servo drive can be checked by its own display to determine that it is valid. If the drive is not active or is overloaded, check the display of this drive and it will not display or signal an alarm. In this case, the machine will not work.

Suzhou Wonsten specializes in production, CNC tube bending machine, automatic equipment, etc. The company abides by the business philosophy of "Quality First, Customer Supreme, Honesty Based", sincerely welcome new and old customers to visit us. The staff will be happy to provide you with a full range of services.

Comments
* The email will not be published on the website.