1 min read


   Want the machine to operate normally for a long time, we need to do daily maintenance methods and standard use, and the widely used semi-automatic hydraulic pipe bending machine is no exception. Need to be aware of some attention to maintenance and bending speed.

  During the operation of the semi-automatic hydraulic pipe bender, the parts of the pipe bender can be maintained under severe environmental conditions, improper operation and misoperation, and overload. The pipe bender system is suitable for operation in the environment of ± 40 ℃ and 0-95% humidity. The pipe bender is suitable for local use at an altitude of 0-3000m. Before working, the suitable working place should be selected. The site can not only achieve the accumulation of straight pipes and bent pipes, but also ensure that the pressure of the equipment can be accepted on the ground. Bending function, come to check whether the appearance of the corrosion-resistant mother pipe has oil stains, pits, twists, folds of the anticorrosion layer, unclear identification of the anticorrosion number and pipe number or wrong writing, mechanical damage and other appearance defects, and do a good job of inspection recording.

   In addition, the main influence of semi-automatic hydraulic pipe bending machine bending forming speed on forming quality is:

If the speed is too fast, it will simply form the flat part of the tortuous part of the catheter, and the roundness will not meet the requirements, which will result in the cracking and breaking of the catheter; if the speed is too slow, it will simply form the wrinkling of the catheter and the compression block slipping. The sag of the tortuous part of the catheter is formed. It is appropriate to confirm the tortuous speed of the catheter as 20%-40% of the tortuous speed of the machine.

* The email will not be published on the website.