6 قراءة دقيقة

Target Industry: Heavy Agricultural Equipment & Farm Implements

Workpiece Type: High-Pressure Seamless Steel Hydraulic Oil Lines

Equipment Model: 50CNC4A2S Automatic CNC Pipe Bending Machine (Dual-Stack with Roll/Push Bending)

Background & Project Objective

In high-capacity agricultural equipment—such as combine harvesters, air seeders, and large-scale soil tillage machinery—hydraulic systems serve as the core power distribution network. Operating under continuous vibration, outdoor weather exposure, and hydraulic pressure pulses exceeding 30 MPa, these systems rely heavily on rigid, precision-bent steel lines.

A well-established agricultural machinery manufacturer in Russia, active in the industry since 1991, recently partnered with our team to upgrade its internal pipe processing setup. As part of a new product development initiative, the manufacturer required an automated tube bending machine capable of forming intricate hydraulic oil circuits with varying bend radii across single tube lengths.

To satisfy these requirements, the 50CNC4A2S CNC pipe bender equipped with continuous push bending capability was selected and integrated into their R&D and serial manufacturing pipeline.

Manufacturing Pain Points in Farm Machinery Hydraulics

Fabricating hydraulic piping for farm machinery presents specific structural and geometric challenges:

1. Mixed Bend Radii on Single Workpieces

Hydraulic lines often require tight 90° or 180° turns to fit around structural brackets, combined with long, sweeping large-radius curves to follow the main chassis beams. Traditional rotary draw benders can only handle fixed small radii (CLR = 1.5D–3D). Achieving large-radius curves traditionally required manual rolling operations on separate machines, leading to dimensional inconsistencies and excessive production cycle times.

2. Tight Internal Clearance & Collision Risk

Agricultural equipment engine bays and frame tunnels offer minimal clearance. Hydraulic tubes must be formed with tight tolerances to prevent mechanical interference with moving components, drive shafts, and linkage arms.

3. Wall Thinning and Cross-Section Flattening

When bending thick-wall seamless carbon or stainless steel tubing, controlling ovality is critical. Excessive deformation restricts fluid flow rate, raises oil temperatures, and creates stress concentration points that reduce hydraulic line lifespan under peak system loads.

Machine Configuration: 50CNC4A2S Dual-Stack Push Bender

The 50CNC4A2S was configured specifically to overcome these hydraulic fabrication obstacles. The machine architecture integrates 4-axis electric servo drives with a dual-stack head design:

[ Upper Stack: Rotary Draw Bending ]  -->  Tight-radius elbows & compact direction changes
[ Lower Stack: Push / Roll Bending ]   -->  Continuous large-radius sweeping curves

Key Technical Specifications & Features:

  • Hydraulic Pipe Capacity: Handles cold-drawn seamless steel tubes up to 50 mm OD with wall thicknesses tailored to high-pressure ratings.
  • Integrated Push Bending (Roll Bending): The second tooling stack features a specialized push-bending roll system. The CNC feeder pushes the tube through the die under continuous servo control, generating arbitrary large radii without changing tooling.
  • 4-Axis Synchronized Servo Control:
    • Y-Axis (Feeding): High-torque servo drive for precise longitudinal positioning.
    • B-Axis (Rotation): Servo-controlled spatial rotation for complex 3D orientation.
    • C-Axis (Bending): Servo-driven bending arm ensuring accurate bend angle control within ±0.1°.
    • X-Axis (Shift): Automatic vertical and horizontal shifting between top and bottom tooling stacks.
  • Mandrel & Booster System: Integrated hydraulic pressure die booster works in sync with an automatic mandrel lubrication unit. This arrangement actively pushes material into the bend zone, keeping wall thinning under 10% and ovality under 5%.
  • 3D CAD Interface & Simulation: The CNC control system accepts STEP/IGES CAD files directly. The software calculates tube elongation, compensates for material springback, and runs full 3D collision simulations before initiation.

Operational Results & Technical Benefits

Following commissioning at the customer’s production plant, the 50CNC4A2S pipe bender delivered immediate improvements to their hydraulic line manufacturing workflow:

  1. Elimination of Secondary Operations: Complex hydraulic lines containing both tight bends and wide-sweeping arcs are completed in a single continuous cycle on one machine.
  2. Improved Flow Efficiency & Leak Reduction: Using continuous bent steel tubes reduces the number of welded joints, threaded elbows, and hose adapters. This maintains smooth hydraulic fluid flow and eliminates potential leakage points during heavy field operation.
  3. Streamlined Engineering Iterations: The machine's CAD/CAM integration enables the R&D engineering team to move from 3D hydraulic line models to finished physical test samples in minutes, supporting rapid iteration of new machinery prototypes.

Summary

The deployment of the 50CNC4A2S CNC push bending machine demonstrates how modern tube processing technology supports the evolving requirements of agricultural machinery manufacturing. By combining rotary draw bending and continuous push bending in a single setup, machinery builders achieve superior hydraulic line quality, reduced processing time, and full operational flexibility for next-generation equipment lines.Explore Pipe Bending Solutions for Heavy Machinery:Visit www.pipebendmachine.com to view full technical specifications, tooling options, and machine video demonstrations.

تعليقات
* لن يتم نشر هذا البريد الإلكتروني على الموقع.